Gstreamer H.264 encoding problem

Robotics & Edge Computing Jetson & Embedded Systems Jetson TK1
1

Hi,

I’m trying to test hardware h.264 encoding according to the Jetson multimedia user guide:

gst-launch-0.10 videotestsrc ! ‘video/x-raw-yuv, width=(int)1280, height=(int)720, format=(fourcc)I420’ ! nv_omx_h264enc ! qtmux ! filesink location=test.mp4 -v -e

I’m getting:

Inside NvxLiteH264DecoderLowLatencyInitNvxLiteH264DecoderLowLatencyInit set DPB and MjstreamingSetting pipeline to PAUSED ... /GstPipeline:pipeline0/GstVideoTestSrc:videotestsrc0.GstPad:src: caps = video/x-raw-yuv, width=(int)1280, height=(int)720, framerate=(fraction)30/1, format=(fourcc)I420, color-matrix=(string)sdtv, chroma-site=(string)mpeg2 Pipeline is PREROLLING ... /GstPipeline:pipeline0/GstCapsFilter:capsfilter0.GstPad:src: caps = video/x-raw-yuv, width=(int)1280, height=(int)720, framerate=(fraction)30/1, format=(fourcc)I420, color-matrix=(string)sdtv, chroma-site=(string)mpeg2 /GstPipeline:pipeline0/GstCapsFilter:capsfilter0.GstPad:sink: caps = video/x-raw-yuv, width=(int)1280, height=(int)720, framerate=(fraction)30/1, format=(fourcc)I420, color-matrix=(string)sdtv, chroma-site=(string)mpeg2 Framerate set to : 30 at NvxVideoEncoderSetParameter/GstPipeline:pipeline0/GstOmxH264Enc:omxh264enc0.GstPad:sink: caps = video/x-raw-yuv, width=(int)1280, height=(int)720, framerate=(fraction)30/1, format=(fourcc)I420, color-matrix=(string)sdtv, chroma-site=(string)mpeg2 /GstPipeline:pipeline0/GstOmxH264Enc:omxh264enc0.GstPad:sink: caps = video/x-raw-yuv, width=(int)1280, height=(int)720, framerate=(fraction)30/1, format=(fourcc)I420, color-matrix=(string)sdtv, chroma-site=(string)mpeg2 NvMMLiteOpen : Block : BlockType = 4  ===== MSENC ===== NvMMLiteBlockCreate : Block : BlockType = 4  GetClientManagedSyncPoint ioctl failed with 25 VENC: TryProcessingData: 1896:  VideoEncFeedImage failed. Input buffer 0 sent VENC: NvMMLiteVideoEncDoWork: 2280: BlockSide error 0x3000f Event_BlockError from 0BlockAvcEnc : Error code - 3000f Sending error event from 0BlockAvcEncERROR: from element /GstPipeline:pipeline0/GstOmxH264Enc:omxh264enc0: GStreamer encountered a general supporting library error. Additional debug info: /dvs/git/dirty/git-master_linux/external/gstreamer/gst-openmax/omx/gstomx_util.c(1193): omx_report_error (): /GstPipeline:pipeline0/GstOmxH264Enc:omxh264enc0: The cause of the error could not be determined ERROR: pipeline doesn't want to preroll. Setting pipeline to NULL ... /GstPipeline:pipeline0/GstOmxH264Enc:omxh264enc0.GstPad:sink: caps = NULL NVMAP_IOC_FREE failed: Bad file descriptor NVMAP_IOC_FREE failed: Bad file descriptor NVMAP_IOC_FREE failed: Bad file descriptor /GstPipeline:pipeline0/GstCapsFilter:capsfilter0.GstPad:src: caps = NULL /GstPipeline:pipeline0/GstCapsFilter:capsfilter0.GstPad:sink: caps = NULL /GstPipeline:pipeline0/GstVideoTestSrc:videotestsrc0.GstPad:src: caps = NULL Freeing pipeline ...

Does anyone have any experience with that?
I should mention that the VP8 example works, and other variations of h264 encoding/decoding doesn’t (with the same error).

Thanks!

2

I tested the same command and it works for me.

Which L4T version are you running? 19r3 or 21r1? Do you have the stock kernel or something else?

3

I’m running Grinch kernel with L4T 21.1. No other modifications.

4

The Grinch kernel is for the old 19r3 release. I recommend that you try with the newest one. With u-boot it’s easy to support multiple kernels at the same time and just choose what to use during the boot-up.

5

OK, I’ll try using stock kernel and report back. Thanks!